57 Beta Technology - Specialty PoolShot is a microprocessor-controlled, repeating event chemical injection pump for accurate dosing in a variety of applications involving large bodies of water such as pools, spas, fountains and ponds. PoolShot features: n Programmable delay, dose and lockout times. n Delay and dose time ranges: 1 sec to 19m 59s n Lockout and delay times combined: 1 sec to 39m 58s. PoolShot can be triggered from an external controller, power connections (115 to 230 Vac ), a contact closure or from an external voltage signal from 24 to 240 Vac to Vdc using an optocoupler. PoolShot can handle chlorination for pools up to 100,000 gallons. For larger pools or load issues use either one or two PoolShots to establish a baseline of regular chemical addition, adding a Pool-2000 to inject booster doses during times of high bather load or sunshine. Pool Shot Recycle-Timer or Controller-Activated Pump Features n Buttons and liquid crystal display allow quick digital programming n Water and sunshine-resistant enclosure n Standard tube out-performs competitor’s tubes and handles all pool chemicals: chlorine, acid, algaecide, clarifiers, etc. n Repeat cycles n Programming with a 10-minutes runtime and a 1-second delay allows this dispenser to be used as a “slave” pump to an ORP pH controller PoolShot Power Configurations: 115 Vac, 50 - 60 Hz Pump: Peristalic, self-priming, self-checking 6 volt DC Flow Rate: 14 gpd Pressure: 30 psi